X275 & LDR KellTrac Spec Viking Crusader Coilover Kit, Triple Adjust, Pair

Are you unhappy with your short shaft? Why settle? Upgrade that shaft to a full 9 inches!

Kelltrac is proud to offer this Viking Performance 9" Stroke Coilover Kit for those of you who want maximum separation. This exact coilover kit has been proven to low 4s and 1.00s to the sixty-foot on multiple cars, within their first few passes on these units. Our customers are replacing setups that cost much more that they're having issues with, with these simple and easy to use pieces - no canisters and tanks and fancy lines everywhere. You are simply buying the most powerful shocks money can buy!

RIDE HEIGHT RANGE MEASUREMENT
This is a very crucial specification, please acquire the accurate measurement *AT YOUR DESIRED RIDE HEIGHT* of the top centerline to the bottom centerline of your upper and lower shock mounts. If you have a dedicated racecar and have a specific style suspension system, the following will help:

If you have a very customized setup and have specific geometry that makes the suspension SEPARATE OR SQUAT then you need to consider the following information for your application. See chart highlighted below for full shock travel information (compressed and extended lengths). Example, if your ride height is 16" and you have a rear suspension that separates 4" when launching...you do not want to get a shock that sits in the middle of its stroke, as you will top the shock out and have traction problems. In this case you would want to have 1-2" of shaft showing at ride height and the 5+" in the shaft ready to extend.

RIDE HEIGHT VS SEPARATION GEOMETRY EXAMPLE: (will have 7.75" of available extension with a 16" ride height)
16.00" ride height - 14.75" full compressed = 1.25" of shock shaft showing at ride height (available to compress/squat)

9.00" stroke shock - 1.25" of shock shaft showing = 7.75" of shock travel available to extend/droop

*We have customers who run these at 0.750" to 1.00" of shaft showing, with 8"+ of extension down track

SHOCK LENGTHS - FULL COMPRESSED -VS- FULL EXTENDED
C315-316 14.75-23.75

BUSHING STYLE OPTIONS
Bearing mount widths are available in 1.00", 1.25" and 1.50" widths and use 1/2" -OR- 5/8" Bolts.

*1.00" Wide Spherical Bearings are only compatible with 1/2" diameter bolts*

VIKING PERFORMANCE TRIPLE ADJUSTABLE COMPRESSION VALVING: (We only offer these in Berserker and Crusader Valving)
When performance is on the line, look no further than a Viking Performance Triple Adjustable shock for your performance vehicle! With these Triple Adjustable shocks, rebound tuning is the same as the double adjustable. On the compression side, the compression is split into two adjustments - low speed and high speed. This allows for significantly greater high speed shaft forces without impacting low speed feel or performance. The potential force range at lower speeds becomes an area instead of fixed lines. Small and compact like their industry leading double adjustables, these Viking Triples do not need canisters.

Triple Adjustable shocks offer the most powerful compression forces of any other shock offering available today! A triple adjustable shock is the best choice for all situations and applications.

*Purchase of this product includes remote support (limited) - Please choose remote support options when checking out